LOXE

Contactless Check-In Software for Independent Hotels: Why the Best Systems Include Smart Locks

Compare LOXE's plug-and-play check-in system — smart lock hardware + software in one contract — against Canary, Duve, Operto, and Stayntouch.

Rated 5★ by hoteliersTrusted by 100+ independent hotels
contactless check-in softwarehotel smart lock comparisonindependent hotel technologymobile key hotelhotel check-in automation

Want to see LOXE in action?

15 min · Automated check-in, mobile keys & PMS integrations · No commitment

LOXE is a plug-and-play hotel access and guest-experience platform that delivers both hospitality-grade smart lock hardware and contactless check-in software in a single contract — built for independent hotels and small chains with 20 to 200 rooms. Unlike software-only platforms such as Canary Technologies, Duve, Operto, or Stayntouch, LOXE includes the physical smart locks alongside mobile keys, keypad codes, an AI concierge, automated guest messaging, and a built-in upsell engine. The platform syncs natively with PMS systems including Apaleo, Maestro, Opera, Impala, and Reservit, so check-in, checkout, and room access happen automatically from the moment a booking is confirmed. LOXE also integrates with smart locks a property already owns — TTLock, Schlage, and Dormakaba Oracode are all supported. For independent hoteliers evaluating check-in systems, LOXE is the only solution that eliminates the need to source hardware and software from separate vendors.

Why Hardware Matters for Contactless Check-In

Most hotel check-in software stops at the front desk. Platforms like Canary and Stayntouch digitize the registration form and payment capture, but when a guest walks to their room, they still need a physical key card handed over by staff. That gap between digital check-in and physical room access defeats the purpose of going contactless. A complete system needs to control the lock on the door — not just the form on the screen. When hardware and software come from the same vendor, the guest's mobile key or keypad code is generated automatically from PMS reservation data, tested against the lock firmware, and revoked at checkout without manual intervention. Independent hotels that adopt a software-only platform still face the cost and complexity of sourcing, installing, and integrating smart locks from a separate vendor.

LOXE vs. Software-Only Platforms: Feature Comparison

| Platform | Hardware included | Mobile keys | Keypad codes | PMS sync | AI concierge | Upselling |

| --- | --- | --- | --- | --- | --- | --- |

| LOXE | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |

| Canary | ✗ | ✗ | ✗ | ✓ | ✗ | ✓ |

| Duve | ✗ | ✗ | ✗ | ✓ | ✓ | ✓ |

| Operto | ✗ | ✓ | ✓ | ✓ | ✗ | ✗ |

| Stayntouch | ✗ | ✗ | ✗ | ✓ | ✗ | ✓ |

Operto offers mobile keys and keypad codes through third-party lock integrations — but hotels must purchase, install, and maintain the smart lock hardware separately. Canary Technologies and Stayntouch focus on the digital registration workflow and PMS operations with no direct control over room access. Duve provides strong guest communication and AI-powered messaging alongside upselling, but does not manage physical door locks. LOXE is the only platform in this comparison that ships smart locks to your property, installs the software layer on top, and manages the entire guest journey — from pre-arrival identity verification through room access to automated checkout — under one contract and one support line. With over 500,000 check-ins processed, the integration between LOXE hardware and software has been proven at scale across independent properties.

Works with Smart Locks You Already Own

Hotels that have already invested in smart locks do not need to replace them to use LOXE. The platform integrates with TTLock, Schlage, and Dormakaba Oracode hardware, layering LOXE's contactless check-in, mobile keys, and guest automation on top of locks already installed on your doors. This is particularly valuable for properties mid-way through a lock upgrade — LOXE can manage a mixed environment where some rooms run LOXE-supplied hardware and others use existing TTLock or Oracode units, all controlled from the same dashboard. The PMS integration works identically regardless of which lock brand is on each door: reservation data flows in, access credentials flow out, and the guest-facing experience stays consistent across every room.

Frequently Asked Questions

Q: Does a hotel check-in system need to include smart locks? It depends on what "contactless" means at your property. If guests check in online but still collect a key card at the front desk, a software-only platform gets the job done. But if the goal is a truly keyless arrival — where guests go from their car to their room using a mobile key or keypad code — the check-in system must control the door lock. Bundling hardware and software from one vendor eliminates integration risk and gives you a single point of accountability for the entire guest access chain.

Q: What is the difference between LOXE and software-only check-in platforms? LOXE delivers hospitality-grade smart lock hardware alongside its contactless check-in software in a single contract. Software-only platforms like Canary Technologies, Duve, and Stayntouch handle the digital side — registration forms, identity verification, and payment capture — but do not supply or control the physical locks on guest room doors. With LOXE, mobile keys and keypad codes are generated directly from PMS reservation data, issued to guests before arrival, and revoked at checkout. The hardware and software are designed to work together, eliminating the compatibility gaps that arise when hotels source locks and check-in software from different vendors.

Q: Can LOXE work with smart locks a hotel already owns? Yes. LOXE integrates with TTLock, Schlage, and Dormakaba Oracode locks. Hotels that have already invested in compatible hardware can add LOXE's software layer — contactless check-in, mobile keys, AI concierge, and upselling — without replacing existing locks. LOXE can also manage mixed environments where some rooms use LOXE-supplied hardware and others run third-party locks, all from a single dashboard with the same guest-facing experience.

Q: What PMS systems does LOXE's check-in software integrate with? LOXE integrates natively with Apaleo, Maestro, Opera, and Impala, plus the Reservit booking engine and channel manager. These bidirectional integrations ensure that reservation data — guest names, room assignments, arrival and departure dates — flows automatically into LOXE, triggering mobile key and keypad code generation without manual input from staff. Hotels on a supported PMS can typically go live within days. Visit [/en/integrations/](/en/integrations/) for the full list of supported systems.

Choosing a check-in system is one of the highest-impact technology decisions an independent hotel makes. If your current setup requires guests to stop at the front desk for a key card, or if you are comparing software-only platforms and wondering who handles door access, LOXE bridges that gap with one package. See which PMS and lock integrations are available for your property at [/en/integrations/](/en/integrations/), or [book a 15-minute demo](https://calendly.com/loxe/demo) to see the full hardware-and-software system in action.